Tiles for the terrace and balcony must meet the relevant requirements in order to be functional and durable for many years. Therefore, we take into account durability, i.e. hardness, resistance to abrasion and frost, water absorption, check whether the tile does not slip. It should also be important to us whether we can easily keep them clean, because various undesirable particles and deposits appear on the terrace at any time of the year.Solid tile with a low level of abrasion and water absorption
There are many tiles on the market from different manufacturers, made of different materials, with different properties. These are ceramic tiles, porcelain stoneware, clinker and stone tiles for various purposes. For our terraces, we most often choose tiles made of porcelain stoneware , because it is a functional solution at a good price. In order for the terrace to be resistant to loads and not damaged with frequent use, the tile must have the appropriate hardness.Frost-resistant and non-slip tile, resistant to staining
The water absorption described above is closely related to the frost resistance of the tile . The lower the water absorption of the material, the better its frost resistance will be for obvious reasons: water penetrating deep into the tile (and can also penetrate from the installation side as technical water from the solution), and the temperature drops below 0 ° C, will increase in volume and may damage the plate. That is why, among other things, the tile is not laid when frost approaches, although, interestingly, the saturation of the pores of the tile with water can last up to 4 years! Therefore , only tiles with low water absorption and high frost resistance are safe . Another important aspect is the anti-slip properties, which in the case of tiles are indicated by the letter R with an added digit. The higher the number, the better the slip resistance. The terrace tile should have a minimum slip resistance of R10 . When discussing the choice of tiles, we often forget to keep it clean. Terrace tiles, like other tiles, must be resistant to stains, and this depends on its microstructure. The more porous the tile, the greater the risk of stains, for example from spilled colored drink, which we will not remove immediately. Due to the fact that a tile suitable for a terrace should have low water absorption, taking into account this parameter, it can be assumed that the tile will also be resistant to stain formation. Buy Levitra with Dapoxetine Vardenafil 20 mg + Dapoxetine 60 mg.